Hi
I am trying to configure vDS with LACP.
I have 2 servers with 4 NICs each. I use 2 ports from each ESXi to build vDS.
ESXi is 5.1
Switch is Catalyst 3750.
Ports on the ESXi side looks up. I can see both ESXi with CDP or LLDP.
Then I configured LACP on the vDS and on the switch.
Both sides configured for the IP hash load balancing.
Ports from one of the servers on the switche are bundled into the port-channel.
Ports from the other server are in the suspended mode.
Am I doung something wrong?
Any advices?
Here is switch configuration:
port-channel load-balance src-dst-ip
interface Port-channel1
description : Port-Channel to dvSwitch-1
switchport trunk encapsulation dot1q
switchport mode trunk
load-interval 30
spanning-tree portfast trunk
interface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
!
interface GigabitEthernet1/0/2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
!
interface GigabitEthernet1/0/13
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
!
interface GigabitEthernet1/0/14
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
!