At this moment i'm using NAT that comes with Workstation. But i bought additional public address that i'd like to assign to one of the guest machines. I get it i would have to switch to bridge to use it. But that's not all i have to do, there is more and i don't know what it its.
I have main IP address in /30 and another one (bought separately) in 32.
Here's the advice that hosting comapy admin's gave me:
If you are using Windows 2008 server and VMware Workstation virtualization on this system, guest placed on vmware must have a non-public IP address. Then you have to make a SNAT translation from public IP address to the private IP. Otherwise, services will not function properly.Additional addressing is an addressing with out subnet and have to have a prefix mask 255.255.255.255 / 32 (single ip)Such addressing does not have a gateway and the router has to be your server which ought to route it further.VMWARE pages in the knowledge base are given examples of this type of solutions, please be aware of them.
Maby this will tell you more then it tells me.
Regards,
Maciej Berezinski
