Re: Can't reprepare a cluster in VSM network virtualization
please contact our support for this issue if you haven't done so already. They should be able to help you through it.
View ArticleRe: New to forum; What is the use / advantages of vmware view:
hi weinstein5, Thanks for reply. The cost savings comes from not having to replace the desktop - the View client is very light and since all the processing is done on the ESXi host there is no need...
View Articlevcenter 4.0 build 208111 – Error - HA agent on esx 1 in cluster cannot...
vcenter 4.0 build – Error - HA agent on esx 1 in cluster cannot complete HA configuration. This occurred after we turned off hosts for maintenance and brought back up.
View ArticleInstalling/Running Windows in EFI Mode
Hi guys, I am trying to run Windows x64 (either 7 or 8) in EFI mode. I'm using VMWare Fusion 5.0.3. I have added the line "firmware=efi" to the vmx file to enable EFI mode. I have mounted the...
View ArticleRe: Converter Fail at 1% vmacore application loop
Any idea when a fix for this might be coming?? I just spent a whole day hacking at this issue before running into this solution. And apparently this is a KNOWN issue (judging by the VMware employee's...
View ArticleClik here to view.
Re: Assign public IP/32 to guest
What you are using NAT or Bridge? In /32 IP address first one is you network address second one is your gateway address and third one is usiable adddress(You can use to your guest) and last one is...
View ArticleClik here to view.
Re: unable to boot x64 VMs on nested ESXi host
Hi a.p. Thank you for the reply. The VM version is now vmx-09 but same thing is happening. Longmode is unsupported. It is required for 64-bit guest OS support. On Intel systems, longmode requires...
View ArticleConeverter is not working
Trying to Use converter to push an existing VMX and VMDK file into out environment. Have tried converter 4.3 and 5.0, keeps crashing or timing out. Conversion is going to a vCenter 5.1 server with ESXI...
View ArticleRe: Converter Fail at 1% vmacore application loop
Yes, you use the same static IP to convert Linux and your ARP cash is still remembered old MAC address while new VM has new MAC address.As a workaround you should use another static IP address for...
View ArticleRe: P2V problems withe ESX 5.1
The VMware converter requires a UNC path name as a destination. At first I tried a UNC path to a local drive on the vSphere client machine which is on the same subnet as the target. Every time I...
View ArticleRe: vSphere Replication Server Login Problems
SCX, this did help me...I remembered the password I had set, but didn't remember the default username...anyway, just for emphasis, the default username on the vSphere Replication Appliance is root.
View ArticleRe: Failed VMWare 9.0.1 to 9.0.2 upgrade. Cannot install Vmware 9.0.1 or 9.0.2
Did you try a fresh install of VMware 9.0.2 or was this also an upgrade from 9.0.1? . How did you try the upgrade?. Do not try to upgrade from within the 9.0.1 program (many but not all the time...
View ArticleClik here to view.
Clik here to view.
Re: P2V problems withe ESX 5.1
Also if I move the converted file to workstation 9 it runs with no issues. I don't think sending the file directly to ESXi will make any difference as the file is verifed as good by the fact the...
View ArticleRe: unable to boot x64 VMs on nested ESXi host
Please post (attach) the ESXi VM's latest vmware.log file to see what may be causing the issue. André
View ArticleRe: P2V problems withe ESX 5.1
Vmware Converter is designed to allow you to migrate a running machine (this can be both virtual or physical), a VM from one vSphere enfironment to another or as you are trying to do from another...
View ArticleRe: HP ML 350e G8 / Smart Array B120i
Any word on if this controller has successfully been used in 5.1? I am looking to purchase one of these servers for a SMB, but not too sure if I want to purchase a hardware raid card as well.
View ArticleClik here to view.
Re: Physical to Virtual Migration Approach for Exchange CCR 2007 on Windows...
Hi Ravi, you can take a couple of approaches here. First off, I want to make sure you are not wanting to do a P2V conversion, that is taking the OS image that is running on the physical host and, using...
View Article