Re: [VMware vCenter - Alarm Host connection state] Host connection state...
It does seem that the heartbeats are timing out or is not received. The backup solution might take up the cpu cycles which might cause this. Else can you confirm if you are getting this alert on a VM...
View ArticleRe: vShere can not login to vCenter
I do agree with Umesh's point, since you are saying that but i login the vCenter via VMware vSphere Web Client, any idea ? It does mean that the user you are trying is not granted vpxauser / any user...
View ArticleRe: Scratchy / Abnormal Sound Card Sound from XP Guest on Windows 8 Pro Host...
I wish to clarify. Upgrading the 3D accelerated drivers on the host only made the problem intermittent. It actually didn't solve the problem. Changing the virtualized 3D accelerator settings for the...
View ArticleRe: Jumbo Frames End to End
If the "do-not-fragment" flag is set on the packet it will simply be dropped by the network device that is not configured for Jumbo Frames.If the flag is not set it will fragment the packet (divide it...
View ArticleRe: Unhandled error when trying to Configure Machine
I would say "if it starts, the it's OK". All additional steps are an attempt to make the target bootable. If you are not using Customization feature (change Windows license, join to domain, etc) then...
View ArticleRe: vSPHERE 5.1 FARM Migration
I'm changing the entire infra like I've mentioned in the first email. New hosts, new LAN Switches, new SAN switches and new storage. The current infra contains servers from a diferente generation than...
View ArticleVM latency issues after Hard drive replacement
Ihad to replace a hard drive on our VMware 5.1 essentials server yesterday after it had failed. All seemed ok and after installing Dell open manage tools I restarted the server. Now after 24 hours I...
View ArticleRe: SNMP configuration with powerCLI
The CLI doc says you can specify up to three targets.Perhaps try like this $targets="1.2.3.4/mycommunity,5.6.7.8/mycommunity,9.1.2.3/mycommunity"
View ArticleRe: Workstation 9 AutoStart won't Autostart guest Windows 8 host
The fix for this should be in the next update and release.For those affected in the mean time, there is a KB article that documents a workaround:...
View Articlevmware 5.1 vs 5
hello,we have to deploy a new vmware infrastructure. I have installed ESXi / vcenter 5, entreprise plus.I need to know if we have to do an upgrade to 5.1? what are the pros and cons?Thanks
View ArticleRe: finding Network statistics when logged in ssh on my ESXI Mng network...
Hi,Thanks a lot for your answer!! vsish -e get /net/pNics/vmnic0/stats - works great!!!! when I typied "esxcli network nic stats get -n vmnic0" I get "Error: Unknown command or namespace network nic...
View ArticleRe: [VMware vCenter - Alarm Host connection state] Host connection state...
Hi zXi, The alert in question is for the ESX Host which go in the disconnected/not reposnding state. I will not able to tell you about the machine with zero load. In my enviornment the Service Console...
View ArticleClik here to view.
Re: SNMP configuration with powerCLI
Awesome..That worked!!... I tried with more than 3 and it failed, when I tried 3 it worked. Does this mean that we can only have 3 target hosts and not more..? If yes, I'll get the guys select 3 out of...
View Articlereconfiguring RAM and CPU of VM machines
Hello! Guys, please kindly help me with my task. I need to reconfigure virtual servers CPU and RAM. That is why I need to the follwoing steps by PowerCLI1) Shut server down2) Change CPU and RAM3) Power...
View ArticleVDP: heavy traffic on lo
Hi,I successfully restored one VM last Thursday. I'm checking CPU Usage of VDP now and it increased to three times since then. Two java processes run constantly and I can see heavy traffic on lo (25...
View ArticleRe: using powercli to control limit disk iops
Hey LucD thanks a lot for your reply. But when I type the command suggested by you : I am getting the output as VM NumCpuShares CpuSharesLevel NumMemShares MemShares...
View ArticleRe: SNMP configuration with powerCLI
Yes, I'm afraid 3 is the maximum number of targets according to the documentation.
View ArticleRe: reconfiguring RAM and CPU of VM machines
Try something like this Import-Csvc:\vms.csv-UseCulture|%{ $vm=Get-VM-Name$_.VMName Shutdown-VMGuest-VM$vm-Confirm:$false while($vm.PowerState-ne"PoweredOff"){ sleep5...
View ArticleThinApp failed to access the Network path
Hi there,I'm trying to configure my ThinApp in the View Administrator and I'm getting "Failed to access the network path".- I have set_up a network share folder in the same Security Server. I can...
View ArticleRe: Virtualizzare un sistema operativo DUAL BOOT (Windows XP + Windows 7)
Ciao. Cosa intendi esattamente con "partizione attiva" ? Non ho potuto provare con il vConverter in versione 3.0.3. perchè non ho trovato da nessuna parte il suo setup.Si trovano solo quelli delle...
View Article